|
|
Zebedee.jpg2008 F24 Championship Car
|
|
17_ adding strengthening ribs.JPGAdding strengthening ribs
|
|
34_ Aerocatches fitted.jpgAerocatches fitted
|
|
22_ All mould sections.JPGAll mould sections
|
|
24_ Applying carbon Fibre.JPGApplying carbon fibre
|
|
16_ Applying fibre glass.jpgApplying fibre glass
|
|
25_ Bodywork separated from mould.JPGBodywork seperated from mould
|
|
23_ Cleaning mould sections.JPGCleaning mould sections
|
|
4_ Completed skeleton 1.JPGCompleted skeleton #1
|
|
5_ Completed skeleton 2.JPGCompleted skeleton #2
|
|
15_ Filled_ Smoothed and primed.jpgFilled Smoothed and Primed
|
|
35_ First test drive.JPGFirst test drive
|
|
33_ front section cut off.jpgFront section cut off
|
|
7_ Holes in chassis filled with styrofoam.JPGHoles in chassis filled with styrofoam
|
|
18_ Marking cut lines very accurately__.JPGMarking cut lines very accurately
|
|
2_ MDF ribs .JPGMDF ribs
|
|
1_ MDF ribs being put together.JPGMDF ribs being put together
|
|
38_ Modified battery clips.JPGModified battery clips
|
|
9_ More filling.JPGMore filling
|
|
11_ More styrofoam gluing.JPGMore styrofoam gluing
|
|
37_ paint job.jpgPaint job
|
|
20_ Precision cutting of mould by Bob__.JPGPrecision cutting of mould by Bob
|
|
26_ Ready to fit bottom bodywork to chassis.JPGReady to fit bottom bodywork to chassis
|
|
32_ Rear bodywork fitted.jpgRear bodywork fitted
|
|
19_ Separating mould.JPGSeparating mould
|
|
13_ Shaping and smoothing.JPGShaping and smoothing
|
|
28_ shaping of styrofoam.jpgShaping styrofoam
|
|
30_ strengthening bottom of bodywork.JPGStrengthening bottom of bodywork
|
|
3_ Strengthening ribs put in.JPGStrengthening ribs just put in
|
|
29_ Strengthening top of bodywork.jpgStrengthening top of bodywork
|
|
8_ Styrofoam glued in with epoxy and glass bubbles.JPGStyrofoam glued in with epoxy and glass bubbles
|
|
14_ Styrofoam sealed with epoxy and glass bubbles.JPGStyrofoam sealed with epoxy and glass bubbles
|
|
31_ Styrofoam wheel arches being glued in.JPGStyrofoam wheel arches being glued in
|
|
27_ test fitting of bodywork.jpgTest fitting of bodywork
|
|
21_ Using wedged to separate top and bottom of mould.JPGUsing wedges to seperate top and bottom of mould
|
|
10_ Wheels being made.JPGWheels being made
|
|
6_ Zebedee chassis.JPGZebedee chassis
|
|
12_ Zebedee Chassis.JPGZebedee Chassis #2
|
|
|
|
|
|
|
|
Login
