Last additions - Zebedee Build |
38_ Modified battery clips.JPGModified battery clipsDec 16, 2009
|
|
37_ paint job.jpgPaint jobDec 16, 2009
|
|
31_ Styrofoam wheel arches being glued in.JPGStyrofoam wheel arches being glued inDec 16, 2009
|
|
32_ Rear bodywork fitted.jpgRear bodywork fittedDec 16, 2009
|
|
33_ front section cut off.jpgFront section cut offDec 16, 2009
|
|
34_ Aerocatches fitted.jpgAerocatches fittedDec 16, 2009
|
|
35_ First test drive.JPGFirst test driveDec 16, 2009
|
|
26_ Ready to fit bottom bodywork to chassis.JPGReady to fit bottom bodywork to chassisDec 16, 2009
|
|
27_ test fitting of bodywork.jpgTest fitting of bodyworkDec 16, 2009
|
|
28_ shaping of styrofoam.jpgShaping styrofoamDec 16, 2009
|
|
29_ Strengthening top of bodywork.jpgStrengthening top of bodyworkDec 16, 2009
|
|
30_ strengthening bottom of bodywork.JPGStrengthening bottom of bodyworkDec 16, 2009
|
|
21_ Using wedged to separate top and bottom of mould.JPGUsing wedges to seperate top and bottom of mouldDec 16, 2009
|
|
22_ All mould sections.JPGAll mould sectionsDec 16, 2009
|
|
23_ Cleaning mould sections.JPGCleaning mould sectionsDec 16, 2009
|
|
24_ Applying carbon Fibre.JPGApplying carbon fibreDec 16, 2009
|
|
25_ Bodywork separated from mould.JPGBodywork seperated from mouldDec 16, 2009
|
|
16_ Applying fibre glass.jpgApplying fibre glassDec 16, 2009
|
|
17_ adding strengthening ribs.JPGAdding strengthening ribsDec 16, 2009
|
|
18_ Marking cut lines very accurately__.JPGMarking cut lines very accuratelyDec 16, 2009
|
|
19_ Separating mould.JPGSeparating mouldDec 16, 2009
|
|
20_ Precision cutting of mould by Bob__.JPGPrecision cutting of mould by BobDec 16, 2009
|
|
11_ More styrofoam gluing.JPGMore styrofoam gluingDec 16, 2009
|
|
12_ Zebedee Chassis.JPGZebedee Chassis #2Dec 16, 2009
|
|
13_ Shaping and smoothing.JPGShaping and smoothingDec 16, 2009
|
|
14_ Styrofoam sealed with epoxy and glass bubbles.JPGStyrofoam sealed with epoxy and glass bubblesDec 16, 2009
|
|
15_ Filled_ Smoothed and primed.jpgFilled Smoothed and PrimedDec 16, 2009
|
|
6_ Zebedee chassis.JPGZebedee chassisDec 16, 2009
|
|
7_ Holes in chassis filled with styrofoam.JPGHoles in chassis filled with styrofoamDec 16, 2009
|
|
8_ Styrofoam glued in with epoxy and glass bubbles.JPGStyrofoam glued in with epoxy and glass bubblesDec 16, 2009
|
|
9_ More filling.JPGMore fillingDec 16, 2009
|
|
10_ Wheels being made.JPGWheels being madeDec 16, 2009
|
|
1_ MDF ribs being put together.JPGMDF ribs being put togetherDec 16, 2009
|
|
2_ MDF ribs .JPGMDF ribsDec 16, 2009
|
|
3_ Strengthening ribs put in.JPGStrengthening ribs just put inDec 16, 2009
|
|
4_ Completed skeleton 1.JPGCompleted skeleton #1Dec 16, 2009
|
|
5_ Completed skeleton 2.JPGCompleted skeleton #2Dec 16, 2009
|
|
Zebedee.jpg2008 F24 Championship CarDec 15, 2009
|
|
|
|
|
|
|